Clay Bead Bracelet – Concepts

Let’s speak about clay bead bracelets—typically referred to as flat beads, too. If you’re trying to get into jewellery making, that is in all probability one of many best and most cheap DIY jewellery you can begin with.

Plus, there are SO many alternative concepts for clay bead bracelets! I’m going to share heaps on this publish, however you may dream up so many extra.

Clay beads are normally product of polymer clay and are available any and each coloration you may consider. Clay bead bracelets are enjoyable to make for a lot of ages, together with older children.

I truly purchased my 13-year-old niece the identical clay bead kit I purchased myself and we each love making jewellery from it. Additionally, have in mind any of those clay bead bracelet concepts may very well be repeated or made bigger right into a necklace when you wished.

Associated: Take a look at extra DIY equipment in our jewellery archive.

Clay Bead Bracelet Provides:

  • Clay beads
  • Elastic cord/Crystal string – I like to make use of colours however clear works effectively, too.
  • Acrylic letter beads and different accent beads or charms (some kits include these)
  • Crimping beads – for closures
  • Connectors – I take advantage of these on bracelets with an elastic wire so you may pull it over your hand, so that you don’t want to lock a clasp, which might be troublesome one-handed.
  • Scissors – the smaller, the higher (some jewellery pliers would work for this too)
  • Jewelry pliers – for crimping beads and different jewellery making duties
  • Bead board – or a felt to cowl your work floor

There are a lot of other ways you may design your clay bead bracelet with completely different equipment or clasp and closures. However these are the fundamental provides that I used to make the bracelets you see pictured.

The right way to Make Bead Bracelets:

  • Design your bracelet. I like to put out the beads on my bead board to verify I’m proud of my design earlier than I begin stringing the beads collectively. This fashion, I can ensure I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.
  • Reduce a bit of elastic wire twice as massive because the widest a part of your hand so you could have loads to work with.
  • Loop the underside of the wire by a crimping bead, then one facet of the connector, then again by the identical crimping bead once more.
  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.
  • String your design onto the wire.
  • Verify that the bracelet is the size you design (if not, add or take off beads).
  • Add one other crimping bead to the top, loop the wire by the opposite facet of the connector, after which by the identical crimping bead and pull tight.
  • Use your pliers once more to crimp down on the bead, fastening the wire in place.
  • When you’ve got additional wire on both facet, you may snip it off and/or tuck it into the beads beside it.

Clay Bead Bracelet Concepts:

Listed below are some concepts for various sorts of designs and coloration combos you may attempt!

  • Multicolored! You’ll be able to repeat the colours or simply add them at random.
  • Use all main colours (crimson, blue, yellow)
  • Use all secondary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one coloration bead for a stable look.
  • All white or black
  • Break up clusters with charms or a glass bead.
  • Add your title or a buddy’s title for gifting.
  • Add a allure or a number of charms for a allure bracelet look.
  • Fill a lot of the bracelet with small gold beads and use the coloured clay beads as an accent.

The place to Purchase Beads?

Under, I’ll hyperlink lots of the particular beads and charms I’ve purchased on-line. But additionally needless to say you should purchase beads and jewellery making provides from many alternative locations like thrift shops, property gross sales, Etsy and eBay.

Additionally, you probably have outdated jewellery that you simply now not put on, you would possibly take it aside and repurpose it in your designs.

  1. My favourite basic clay bead bracelet kit (contains wire and instruments)
  2. Metal letters
  3. Fruit charms
  4. Mushroom beads
  5. Freshwater pearl beads

Steadily Requested Questions

What number of clay beads make a bracelet?

For an grownup with small to medium palms, 125-150 clay beads will make a bracelet. Chances are you’ll want kind of or smaller or bigger sized bracelets.

What string do you employ for clay bead bracelets?

Elastic wire (typically referred to as crystal string) is finest. You should utilize clear or a coloration. However this wire could have some stretch so you may simply pull the bracelet on and off your hand while not having to make use of a clasp.

Are clay bead bracelets waterproof?

Polymer clay (which is normally what clay beads are product of) is waterproof. Nevertheless, most bracelets could have different supplies like string and charms and these might not maintain as much as soaking.

Can clay beads be washed?

Sure. Gently wash with cleaning soap and water when you get meals or dust in your bracelet. The colours is not going to run or fade.

DIY clay bead bracelets are such a enjoyable undertaking anybody can do. I additionally love that it’s one thing you may work on whereas watching a film. 🙂

Associated: 15 Crafts You Can Do Whereas Watching TV


Print

get the how-to
Get the How-To

make clay bead bracelets plus a number of concepts for designs

Cook dinner 15 minutes

Complete 15 minutes

Directions

  • Design your bracelet – I like to put out the beads on my bead board to verify I’m proud of my design earlier than I begin stringing the beads collectively. This fashion I can ensure I like the colours or I can change out the charms or different accent beads I’m utilizing in my design.

  • Reduce a bit of elastic wire twice as massive because the widest a part of your hand, so you could have loads to work with.

  • Loop the underside of the wire by a crimping bead, then one facet of the connector, then again by the identical crimping bead once more.

  • Use your pliers to crimp (smash down) the crimping bead, fastening the wire in place.

  • String your design onto the wire.

  • Verify that the bracelet is the size you design (if not, add or take off beads).

  • Add one other crimping bead to the top, then loop the wire by the opposite facet of the connector, then by the identical crimping bead and pull tight.

  • Use your pliers once more to crimp down on the bead, fastening the wire in place.

  • When you’ve got additional wire on both facet, you may snip it off and/or tuck it into the beads beside it.

Notes

Design concepts to attempt:

  • Multicolored! You’ll be able to repeat the colours or simply add them at random.
  • Use all main colours (crimson, blue, yellow)
  • Use all complimentary colours (orange, inexperienced, purple)
  • Monochromatic – use all one tone or just one coloration bead for a stable look
  • All white or black
  • Break up clusters with charms or a glass bead
  • Add your title or a buddy’s title for gifting
  • Add a allure or a number of charms for a allure bracelet look
  • Fill a lot of the bracelet with small gold beads and use the coloured clay beads as an accent.